The Anchors Behind the Guest Experience
Clean glass and a well kept facade are part of what guests pay for, and both depend on crews working at height. On a tower, that means rope descent from tie backs or a platform hung from davits. On a low-rise resort, it means staff and contractors working near roof edges with fall arrest or fall restraint anchors. Atriums, porte cocheres, and other high interior spaces sometimes have anchors of their own.
ADS Contractors inspects, load tests, and certifies all of them for hotels and resorts on Oahu, Maui, the Big Island, and Kauai.
What the Rule Requires of the Property
Hawaii enforces the federal anchor rule, OSHA 29 CFR 1910.27(b)(1), through its state program, HIOSH. For anchorages used with rope descent systems, the building owner must have each anchorage inspected annually by a qualified person, certified at least every 10 years, and must provide that information in writing to the contractor before the anchors are used.
For managed and franchised properties, the management agreement usually determines who handles that duty day to day. In most hotels the file lives with the director of engineering.
Fall arrest and fall restraint anchors follow the manufacturer's instructions and the applicable ANSI standards. Our guide to Hawaii roof anchor requirements covers both.
Planned Around Occupancy
Most inspection and testing work happens on the roof and out of guest view. Where a test needs a clear area below, we coordinate timing with your team in advance and work around your occupancy and events calendar.
Before the visit we confirm roof access, escort requirements, and any areas that need to stay open. After the visit you get a report your engineering, risk management, and ownership teams can all read.
Salt Air and Turnover
Oceanfront properties take salt spray every day, and corrosion often starts where you cannot see it: under base plates, inside connections, and where dissimilar metals touch.
Hotels also change flags, owners, and engineering staff, and anchor paperwork rarely survives every handoff. If your file is incomplete, we rebuild it from the roof.
Islands We Serve
One vendor and one report format for every property:
What You Receive
- A roof plan with each anchor numbered, and an anchor schedule with type, condition, and status.
- Dated photographs, including close-ups of anything that did not pass.
- Load test records for each anchor tested.
- For recertification, a stamped letter from a Hawaii-licensed structural engineer.
- Plain language repair recommendations with priorities, ready for a capital plan.
Hotel and Resort Anchor Frequently Asked Questions
Will anchor testing disrupt guests?
Usually not. Most of the work happens on the roof. Where a test needs a clear area below, we schedule it with your team in advance and work around occupancy and events.
We operate several properties in Hawaii. Can you inspect them together?
Yes. We schedule Hawaii work in planned trips and can inspect multiple properties on one trip, including properties on different islands, with the same report format for each.
Do interior anchors in atriums and lobbies need inspection?
If workers connect to them, yes. Interior anchors follow the same logic as rooftop anchors: they are inspected on the schedule set by the rule or the manufacturer, and tested where the anchor type calls for it.
Who stamps the recertification letter?
A Hawaii-licensed structural engineer reviews the field data and stamps the recertification letter. ADS performs the inspection and load testing and coordinates the engineering review.
Anchor Services for Hawaii Properties
Annual Anchor Inspection
Yearly visual and structural anchor checks with photo documentation, tuned to salt air conditions.
10-Year Recertification
Stamped engineering recertification for rope descent anchorages reaching the 10 year mark.
Anchor Load Testing
Instrumented load testing with documented hold times and a pass or fail record for each anchor tested.
Davit Inspection
Arm, base, and socket inspection for high rise window washing davit systems.
Tie Back Recertification
Written recertification for the tie back anchors that suspended workers connect to.
Hawaii Overview
Rules, islands served, and how Hawaii projects run.
Related Reading
Hawaii Roof Anchor Requirements: What HIOSH Expects From Building Owners
Hawaii enforces the federal anchor rule through its own state program. What owners must inspect, certify, and document, and what the rule does not cover.
Read the full guide ›Why Honolulu's Salt Air Makes Anchor Inspections Critical
Chloride carried in on the trade winds starts working on rooftop hardware the day it is installed. What that means for how closely your anchors should be watched.
Read the full guide ›Ready to Get Started?
Contact ADS Contractors for a free evaluation of your building's rooftop anchor systems. Tell us what documentation you have, and we will scope the work and reply with a clear, flat quote and no obligation.
Contact Us TodayOr call our Honolulu line: (808) 427-1863